D3000

Descripción:
The back pressure regulator protects compressed air devices from
excessive pressure. If the pressure setpoint is exceeded, overpressure
is vented into the atmosphere until the setpoint is reached again.
It is recommended to choose a pressure range as low as possible.

Media: compressed air, gases or liquids
System_pressure: see chart, max. 65 bar

Adjustment:
by adjusting screw at D3000-01 to -A6, with locknut
by T-handle at D3000-06 to -16, with locknut

Gauge_port: for inlet pressure, G1∕4 on both sides for -01 and -A2, G1/4 on one side for -02 to -16, screw plug(s) are supplied
Mounting_position: any

Temperature_range:
0 °C to 80 °C / 32 °F to 140 °F, for FKM or EPDM
0 °C to 130 °C / 32 °F to 266 °F, high temperature version,
for appropriately conditioned compressed air down to -20 °C / -4 °F
or low temperature version down to -40°C / -40 °F

Body: stainless steel 316L / 1.4404
O-rings: FKM, optionally NBR or EPDM
Diaphragm: NBR/Buna-N with PTFE coating, optionally SST
Inner_valve: stainless steel 316L / 1.4404

Mostrar descripción del producto Ocultar descripción del producto