PIO

Descripción:
The pneumatic proportional pressure regulator controls the outlet pressure in a complete closed loop servo system in proportion to an digital IO-Link command signal. By using the IO-Link Master the valve can be adapted to special applications and optimize the the response time, the overshoot and the precision of the valve. The valve has no constant bleed. At absence of input signal or supply voltage the pressure of the valve stands.

Media: dry, lubricated, unlubricated and 50 μm filtered compr. air or non-corrosive gases
Command_signal: Digital command signal in 1 mbar steps (0-10000 = 0-10 bar),
Control: IO-Link (Class A)
Hysteresis: 1,5% FS, Supply voltage 24 VDC
Software: IODD (necessary)
Linearity: 1,5% FS, Electrical connector M12, 5-pin
Repeatability: 1,5% FS, Protection class IP65

Minimum_Command_signal: 0,5% FS, Current consumption 180 mA
Minimum_Outlet_Pressure: 1,0% FS, Power consumption 3,8 W (< 1W if regulated)

Temperature_range: 0-60 °C Media and Ambient
Body: aluminium
Inner_valve: POM (Polyacetal)
Elastomer: NBR
Mounting_position: any, preferably perpendicular

Mostrar descripción del producto Ocultar descripción del producto