P180

Descripción:
Motorised air pressure regulator designed for precise pneumatic
control using an electrical signal from a remote location. A slip
clutch prevents from motor damages at overload or end position
limitations.

Media: dry, oil-free and 5 µm filtered compressed air or non-corrosive

Operation:
With no electrical power the regulator maintains a precise setpoint
despite variable supply pressure and flow rates. When power is
applied to the motor the pressure outlet changes.

Power_consumption: 6 W
Control_signal: 24 V DC

Electrical_connector:
4 single wires, optionally plug according to DIN 43650A,
contact gap 18 mm, 3-pin with coupling socket

Accuracy: at varying supply pressures = < 1 mbar pressure deviation
Air_consumption: max. 2.3 l/min, subject to outlet pressure,
< 1% of volume flow
Relieving_function: relieving
Mounting_position: any, preferably upright
Relief_capacity: 140 l/min at 1.5 bar outlet and 0.35 bar overpressure
above setpoint, optionally 280 l/min
Gauge_port: 1/4" NPT on both sides of the body

Temperature_range: -18 °C to 60 °C / 0 °F to 140 °F

Body: zinc die-cast
Elastomer: NBR/Buna-N
Inner_valve: stainless steel and brass
Mounting_bracket: black-coated steel

Mostrar descripción del producto Ocultar descripción del producto