Products
Create offers directly in the shop!
You know which items you would like to order and no longer need technical advice?
Simply create your own offer in our shop!
Select your desired items in the shop. On each product page a button is placed, with which you add the article to your personal offer.
Benefits of a customer account:
- Your discounts are displayed automatically
- Overview of all offers
New Customer Login Download as a guest Back
Please fill out the following form to start the download
P8
Choose a version from the table underneath, please.
Description:
Motorised proportional flow valve with low power consumption and resistance to contamination. Throttle
setting by wear-resistant control drives made of oxide ceramic. Throttling occurs with drip-tight zero
shut-off but no gas tightness.
Media: compressed air, vacuum or liquids up to viscosity of 40 mm²/s
Hysteresis: ± 4%
Operation:
DC, synchronous or stepping motor with standard voltage of 24 V DC or AC 10% residual ripple.
All motors fulfil standards EN 61000-6-3, EN 61000-6 and 2014/30/EU.
DC_motor_(15/24):
Motor with feedback potentiometer for servo-amplifier. Resistor 1kΩ ± 20 %, control e.g. by servoamplifier.
Only part of potentiometer range is used. Voltage for potentiometer: 12 V, max. 10 mA.
DC_motor_(50/51):
With integrated position controller. Setpoint input using jumpers: 0...10 V, 0/4...20 mA.
Input resistance 200 kΩ at voltage signal, 500 Ω at current signal.
Stepper_motor_(38):
Bipolar, by means of SAA1042A (Motorola) with drop resistance of 44 Ω per phase at a driver (full-step)
operating voltage of 24 V ± 5%. 2028 steps for 90° control disc turn, 200 Hz nominal step frequency.
Temperature_range: 10 °C to 90 °C / 14 °F to 194 °F
Protection_class: IP 54
Body: brass
Control_discs: oxide ceramic
Elastomer: NBR/Buna-N, optionally FKM or EPDM
Mounting_position: vertical upwards ± 60 °C
