Products
Create offers directly in the shop!
You know which items you would like to order and no longer need technical advice?
Simply create your own offer in our shop!
Select your desired items in the shop. On each product page a button is placed, with which you add the article to your personal offer.
Benefits of a customer account:
- Your discounts are displayed automatically
- Overview of all offers
New Customer Login Download as a guest Back
Please fill out the following form to start the download
D3000
Choose a version from the table underneath, please.
Description:
The back pressure regulator protects compressed air devices from
excessive pressure. If the pressure setpoint is exceeded, overpressure
is vented into the atmosphere until the setpoint is reached again.
It is recommended to choose a pressure range as low as possible.
Media: compressed air, gases or liquids
System_pressure: see chart, max. 65 bar
Adjustment:
by adjusting screw at D3000-01 to -A6, with locknut
by T-handle at D3000-06 to -16, with locknut
Gauge_port: for inlet pressure, G1∕4 on both sides for -01 and -A2, G1/4 on one side for -02 to -16, screw plug(s) are supplied
Mounting_position: any
Temperature_range:
0 °C to 80 °C / 32 °F to 140 °F, for FKM or EPDM
0 °C to 130 °C / 32 °F to 266 °F, high temperature version,
for appropriately conditioned compressed air down to -20 °C / -4 °F
or low temperature version down to -40°C / -40 °F
Body: stainless steel 316L / 1.4404
O-rings: FKM, optionally NBR or EPDM
Diaphragm: NBR/Buna-N with PTFE coating, optionally SST
Inner_valve: stainless steel 316L / 1.4404
