Create offers directly in the shop and download them!
You have added items to your personal offer.
To download your offer, please log in with your access data in the shop.
You will automatically be deducted the deposited discounts.
Don't have a customer account yet?
No problem, register as a new customer or download your offer as a guest.
Benefits of a customer account:
- Your discounts are displayed automatically
- Overview of all offers
New Customer Login Download as a guest Back
Please fill out the following form to start the download
P8
请您从概览列表中选择一项商品款型。
描述:
Motorised proportional flow valve with low power consumption and resistance to contamination. Throttle
setting by wear-resistant control drives made of oxide ceramic. Throttling occurs with drip-tight zero
shut-off but no gas tightness.
Media: compressed air, vacuum or liquids up to viscosity of 40 mm²/s
Hysteresis: ± 4%
Operation:
DC, synchronous or stepping motor with standard voltage of 24 V DC or AC 10% residual ripple.
All motors fulfil standards EN 61000-6-3, EN 61000-6 and 2014/30/EU.
DC_motor_(15/24):
Motor with feedback potentiometer for servo-amplifier. Resistor 1kΩ ± 20 %, control e.g. by servoamplifier.
Only part of potentiometer range is used. Voltage for potentiometer: 12 V, max. 10 mA.
DC_motor_(50/51):
With integrated position controller. Setpoint input using jumpers: 0...10 V, 0/4...20 mA.
Input resistance 200 kΩ at voltage signal, 500 Ω at current signal.
Stepper_motor_(38):
Bipolar, by means of SAA1042A (Motorola) with drop resistance of 44 Ω per phase at a driver (full-step)
operating voltage of 24 V ± 5%. 2028 steps for 90° control disc turn, 200 Hz nominal step frequency.
Temperature_range: 10 °C to 90 °C / 14 °F to 194 °F
Protection_class: IP 54
Body: brass
Control_discs: oxide ceramic
Elastomer: NBR/Buna-N, optionally FKM or EPDM
Mounting_position: vertical upwards ± 60 °C
